Lightweight, easy to use. Ideal for rallies as well as road measurements.
If you are looking for a precise and simple tripmeter, if you are starting in a car or truck rally, if you organize rallies or make road measurements, check out the iTrip L-51 tripmeter. Lightweight housing, clear display, small dimensions and great functionality at the same time. Do you need something more?
The iTrip L-51 is an ideal tripmeter for measurements in car rallies, during the organization of rallies or in road measurements. It provides a clear presentation of the displayed value, simple operation and precision of measurements with small housing dimensions.
The iTrip L-51 tripmeter allows you to connect two speed sensors that are the base for the calculation of the travelled distance. It can also be equipped with a GPS module that assists or completely responsible for calculating the route without the need for sensors.
The L-51 tripmeter has a LED display with a height of digits up to 20 mm. As a result, the displayed values are clear and readable even when driving on off-roads.
The housing of the tripmeter is made out of plastic. Thanks to this, it provides lightness and basic resistance to dust and mechanical damage.
The L-51 tripmeter can be equipped with waypoint routing based on the given course and distance to the destination. To display the route to the destination, it is necessary to connect the Garmin device, which then works as an external L-51 display.
Why it is worth paying attention to this tripmeter?
The L-51 is an extremely durable tripmeter with small dimensions, clear display, backlit buttons, providing precise measurements of distance, speed, voltage in the vehicle's electrical system, course and azimuth routing. In the version with a GPS module it displays the time in the format hh: mm.
It works in cars and trucks in all types of rallies, excluding heavy offroads, motorcycles and quads. Ideally suited to measurements when organizing rallies or road measurements.
By choosing this model you will ensure the safety and comfort of measurements. L-51 is a determinant of valuable equipment for car rallies.
The number high of 14 mm (20 mm) and red color display provides excellent readability of the measured parameters. Red color, high brightness and appropriate dimensions allow you to read even when driving on off-roads. The display is protected with a film that protects against moisture and dirt.
Convenient backlight adjustment allows you to adjust the brightness of the tripmeter screen to external conditions.
The decision to work only basing on the GPS module can be made by the participant, and they can choose not to install the speed sensors during the initial assembly. The decision might also be forced, for example by the malfunction of the speed sensors and the necessity to finish the competition using only the GPS.
If not powered, the GPS module remains on standby, powered by a battery built into the tripmeter, and after regaining power updates the data in less than 1 second. The module uses data from many systems of satellites so that the data is as accurate as possible.
While using the measuring with only the GPS system data, there is no need for calibrating the odometer.
Tripmeter has the function of emergency switching the calculation of the route to the data from the GPS module. Without the need to use the configuration menu, you can directly switch the tripmeter for GPS charging. Such a situation can take place in case of failure of measuring sensors. After switching, the road measurements will be continued from the values that were measured until the sensors failed.
- one entry works with one road sensor
- one input works with one distance sensor, a backup sensor is connected to the other input in order to make a change in case of an emergency
- two inputs with two sensors work simultaneously. The tripmeter performs simultaneous measurements from two sensors mounted on the right and left side of the vehicle, which increases the precision of the measurement
All iTrip tripmeters have a special warning system for a total failure of the speed sensor or for emerging problems with the stability of the speed signal.
Each sensor is matched by a two-color LED on the front panel. It signals the work of sensors and their activity. Visible signaling that there is no speed signal while driving the vehicle indicates problems with its operation or errors in matching the sensor type to the tripmeter.
Sensor control is carried out continuously.
Measurements of the short TRIP route path and the long ODO route can be presented in one of three resolutions, selected by the competitor using the tripmeter. The resolution of the distance indication also affects the value of the long-distance ODO correction:
Short TRIP route
Long ODO route
ODO route correction made with pressing the DOWN and UP arrow
+/- 1 m ( every press )
+/- 10 m ( every press )
+/- 100 m ( every press )
The countdown mode allows you to measure the distance in the opposite direction, ie the countdown of the road back. In practice, this function can be used, for example, in a situation of getting lost. When returning to the place of getting lost, turn on the countdown function and turn it off when you return to the correct route. As a result, the distance measured by the tripmeter will not include the distance traveled on the wrong route.
You can enable the function with a switch connected to one of the harness wires marked as: Driving backwards.
When you use the waypoint routing function, you can use the Garmin device as an additional display of the tripmeter. The Garmin display along with a displayed map and a route to the waypoint will make the route more transparent than ever before.
Working with the driver's external display.
The tripmeter can be attached to any type of vehicle. It has a built-in, 4-point fixing with M4 thread, which guarantee that during the trip the tripmeter will be fixed to the vehicle.
There is also the possibility of installing the tripmeter through dedicated brackets or by means of an industrial adhesive velcro.
The tripmeter has a useful function of adjusting the long ODO path. If the distance measured does not entirely match the distance provided by the organizer, you can use the arrow keys to make a quick correction. The correction value following each key press is related to the display resolution and is: 1, 10 or 100 m.
When you hold down the button, the correction will be repeated.
You can also make a full correction of the long ODO road by entering its value into the tripmeter.
The tripmeter can be equipped with routing waypoints based on the given course and distance to the destination. To display the route to the destination the tripmeter uses an indicator on the displays and, if it is connected to the Garmin device, on its display, which then works as an external display of the tripmeter.
Data for routing waypoints can be entered before the start of the rally/section.
You enter data on "azimuth routing" into on your computer or tablet and use the memory stick to copy them to the tripmeter.
Routing the waypoint takes place in a fraction of a second. There is no need to stop or decrease the speed during the routing.
Parameters measured by the tripmeter can be displayed on an optional driver display that is connected to the tripmeter with cables. Each tripmeter parameter can be sent to the driver's display.
When starting measurements, a default parameter is sent to the driver's display for each of the measurement modes.
- wbudowany GPS ( opcja GPS )
- dwa niezależne liczniki drogi z możliwością kasowaniu
- maksymalny zakres drogi - do 999,9 km
- możliwość korekty drogi długiej - szybka korekta o zadaną wartość lub wpisanie dowolnej wartości
- dwa niezależne wejścia czujników pracujące w 3 konfiguracjach
- system kontroli stanu czujników drogi
- w przypadku awarii czujników możliwość przełączenia na naliczanie z GPS podczas pomiarów ( opcja GPS )
- podświetlane przyciski
- kontrastowy i podświetlany wyświetlacz LED
- elektroniczna ochrona pamięci nastaw i pomiarów
- czytelna sygnalizacja stanu i zasięgu GPS ( opcja GPS )
- wskazanie prędkości
- wskazanie kursu ( opcja GPS )
- wskazanie napięcia w sieci pojazdu
- wskazanie godziny ( opcja GPS )
- ręczna lub automatyczna ( opcja GPS ) kalibracja
- pamięć do 10 współczynnik kalibracyjnych
- możliwość zmiany współczynnika podczas pomiarów
- możlwość korekty współczynnika podczas pomiarów
- trasowanie azymutów w urządzeniach garmin ( opcja GPS + Azymut )
- nawigowanie do punktu końcowego za pomocą strzałki na ekranie ( opcja GPS + Azymut )
- wbudowany ultraszybki moduł GPS
- trasowanie azymutów. Funkcja pozwala na trasowanie waypointów na podstawie podanego azymutu oraz odległości do celu.
- Napięcie zasilania : 8 ÷ 30V
- Pobór prądu : max. 200mA
- Wysokość : 57 mm
- Szerokość : 110 mm
- Głebokość : 32 mm
- Waga : 190 g